nowbotfinders

1. Logik L250stb11 Digital Tv Recorder Manual Free
2. Logik L250stb11 Digital Tv Recorder Manual Download
3. Logik L250stb11 Digital Tv Recorder Manual Online

You may need to retune your TV from time to time to receive new channels or due to engineering work at transmitters. In most cases retuning is straightforward and should only take a few minutes.

Full retuning

A full retune can be done with your remote control. Here are some guidelines for how to do it, but bear in mind every model of digital TV or box will be a little bit different.

• Make sure your Freeview TV or box is on and in digital mode, usually by pressing the DTV or digital button on your remote. Then press 'menu'.
• Select the 'set up' or 'installation' option. If you see picture icons, select the tool box, satellite dish or spanner. If you are prompted for a code, try 0000 or 1234.
• Select the full retune option. This is sometimes called 'first time installation', 'factory reset', 'default settings' or 'shipping conditions'. Do not select 'channel update' or 'add channels'.
• Press 'OK' if your equipment asks if you want to delete all your channels. Don't worry this is normal
• Channels will automatically be installed. This may take a few minutes and your equipment may shut down and restart
• In some cases, where transmitter signals overlap, it may be necessary to carry out a manual retune.

Note: Depending on your TV equipment, you may need to update your favourites list following a retune. Some digital recorders may require scheduled recordings to be reset.

May 25, 2012 - Posted on Mar 24, 2009. Helpful 1; Not Helpful.

Sometimes the electronic equipment in your digital box might suffer from a data error. You might find that the channel or picture has ‘frozen’, your remote control might not work or function lights do not come on.

Often these problems can be fixed by simply resetting your equipment. To do this, switch off the power to your digital box and/or your TV at the wall and leave it for about 5 minutes. When you turn the power back on the box or TV will reboot its software. This will usually fix the problem.

If you are still having problems, you could try doing a full reboot and retune.

On this page we can guide you through a procedure for rebooting which will work for most equipment, but the exact process may be different for your digital box and TV. If in doubt, consult your user manual or contact your manufacturer.

How to reboot your digital box or TV
● Disconnect your appliance’s aerial for a few minutes.
● Go to the menu and select ‘retune’ or ‘rescan’. The box or TV will warn that you will lose existing channels; this is what you want to do, as with the aerial disconnected it will not find any new ones to store and will effectively clear its memory. (Retune can take several minutes.)
● Switch off the appliance’s power source at the wall for about 5 minutes.
● Reconnect the aerial lead before turning the power back on.
● Once your appliance has restarted, go to the menu again and select ‘retune’ or ‘rescan’ again.
● Once the box has finished retuning, you should check to see it is functioning normally once more and if it has the full range of channels it had before.

Logik L250stb11 Digital Tv Recorder Manual Free

If your equipment is still not functioning properly, you should contact the manufacturer’s helpline for further advice.

Logik L250stb11 Digital Tv Recorder Manual Download

If the problem was that you were not finding the full range of channels you had before, we recommend you have your aerial and cabling checked. It is possible your aerial has become damaged or corroded or been moved out of position slightly.

Related content: Loot failed to set load order.

Logik L250stb11 Digital Tv Recorder Manual Online

Find an Installer
getmedigital website. Telephone 0345 257 2140.
Link to Retuning FAQs